CHAMBER DEPTH 36" - CERAMIC FIBER INTERIOR - CONTROLLER SENTINEL
Ceramic fiber firing chamber for fast heating and cooling
The Double Barrel 36T Pro 3 Zone is unusually fast, because it is made with space-age ceramic fiber. It can reach 500°F in minutes. Long lasting, “wavy” elements in the walls are surface-mounted to dissipate heat rapidly and prolong element life. It is the ideal size for the smaller knives.
Long lasting solid state relay
The Double Barrel36-T Pro has a solid state relay, which lasts far longer than standard mechanical relays and offers better temperature control during holds. Solid state relays have no moving parts to wear out. The first thing you will notice is that the relay is silent. You will hear just the reassuring hum of the heating elements. The relay is mounted to an aluminum heat sink, which helps to keep the relay cool. Included with the solid state relay is a safety relay for your peace of mind.
The guillotine door for years of comfortable heat treating
The guillotine door is the ultimate choice for heat treating. The door lifts up and out of the way with one-handed operation. The hot side of the door remains away from you. The door lifts effortlessly with the assistance of a spring on each side. Because of the rigid case and heavy duty opening assembly, the door is sturdy enough for years of faithful service.
Door safety switch
The door micro safety switch shuts off the power to the elements when the door is opened, yet the controller continues to give a temperature readout. The safety switch is standard on Paragon KM and Double Barrel furnaces.
Bartlett Sentinel Controller is standard.
The amazing Bartlett Touch Screen controller is standard on this kiln. Visit here for more information.
Solid furnace construction
The furnace is insulated with 2 1/2” space-age ceramic fiber. A built-in solid stand lifts the firing chamber safely off your worktable. The thermocouple wire is kept safely inside the case for protection from the harsh environment of the typical bladesmith shop.
Thermocouple with “special limit” wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Choose from the optional paint colors
As shown in the photos, the standard knifemaking furnaces are painted a deep black, which would look perfect in your shop. You can choose a different paint color at no extra charge.
Optional Knife Makers Heat Treating Kit
Contains 1 pair hot gloves, 1 heat treating fork, 4 knifeholders, and 8 knifeholder supports. You will need the kit if you remove all the blades together. If you remove them individually with tongs, you will need only the hot gloves and the knifeholders.
Optional Gas Injection Flow Meter
During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. Another way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed.
The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.
Please remember that results with the flow meter vary depending on the type of inert gas you use and your level of experience.